Description Of Device Functions - Endress+Hauser asp-station 2000 Betriebsanleitung

6 Commissioning
Parameter
Info
Info
Basic settings
Name
Code
Date-time
90
Programme stop options: "Reset" of parallel sampling
Menu structure:
Fig. 42: Parallel sampling reset menu structure
Define the programme stop "Reset" of parallel sampling as follows:
no
parall.end
prog. end
6.5

Description of device functions

The following table lists and describes all the setting parameters which you can read off
and configure when configuring the device.
Menu level
↵
Set Act. temp.:
Info Shows the current temperature in the sample compartment.
Status:
Shows the thermostatic status in the sample compartment.
Act. flow:
Shows the current flow rate value of a connected flowmeter.
Powerfail:
Shows the number and duration of power failures which
occurred.
External stop:
Shows the number and duration of external stops.
Event:
Shows the number and duration of event signals.
↵
Set Enter the required device name.
↵
Basic settings
Name
↵
Set Enter the required user code.
↵
Basic settings
!
Code
If you no longer know the user code, enter the customer code
6051 to unlock the controller configuration.
↵
Set Date: Enter the current date.
↵
Basic settings Time: Enter the local time.
Date-time Switch: Select the mode for switching between summer and
winter time.
Summer time: Date and value for switching to summer time.
Normal time: Date and value for switching to winter time.
Parallel sampling is stopped automatically when the last reserve bottle has
been filled.
When the last reserve bottle is filled, parallel sampling continues
automatically with the first reserve bottle.
When the main programme is completed, parallel sampling continues
automatically at the first reserve bottle.
Setting options
Note!
ASP station 2000
Factory setting
ASP 2000
0000
With automatic
switch between
summer and
winter time
Endress+Hauser