Certificates And Approvals; Accessories; 10.10 Documentation - Endress+Hauser asp-station 2000 Betriebsanleitung

ASP station 2000
CE approval
Ex approval
Other standards and
guidelines
UWWTR
Endress+Hauser
10.8

Certificates and approvals

The measuring system meets the legal requirements of the EC directives.
Endress+Hauser confirms successful testing of the device by affixing the CE mark.
Information about currently available Ex versions (ATEX, FM, CSA) can be supplied by
your E+H Sales Centre on request. All explosion protection data are given in a separate
documentation which is available upon request.
• EN 60529:
Degrees of protection by housing (IP code)
• EN 61010:
Safety requirements for electrical equipment for measurement, control and laboratory
use
• EN 61326 (IEC 1326):
Electromagnetic compatibility (EMC requirements)
• NAMUR
Association for Standards for Control and Regulation in the Chemical Industry
WRc/E32 (Ref: UC 3489)
10.9

Accessories

For accessories, refer to Section 8 "Accessories".

10.10 Documentation

❑ Product group Environmental technology - Automatic water samplers
(PG 005R/09/en)
❑ Technical Information ASP station 2000 (TI 059R/09/en)
❑ Ex-Safety instructions: ATEX (XA 017R/09/a3)
❑ Appendix to the operating manual ASP station 2000: DP-Slave-Modul_is Pro Gate
(ZBA 146R/09/en)
❑ Appendix to the operating manual ASP station 2000: Dosing system using a
capacitive medium recognition (ZBA 119R/09/a2)
❑ Appendix to the operating manual ASP station 2000: Sampling from pressurised pipe
lines up to 0.8 bar (ZBA 134R/09/a2)
10 Technical data
109