Return; Notes On Safety Conventions And Icons - Endress+Hauser asp-station 2000 Betriebsanleitung

ASP station 2000

Return

!
"
Notes on safety
conventions and icons
#
"
!
Endress+Hauser
1.4 Return
You should take the following measures before sending the device back to
Endress+Hauser, for example for repair:
• Always enclose a fully-completed "Dangerous Goods Sheet" with the device. Only
then can Endress+Hauser transport, test or repair a returned device.
• If necessary, include special handling regulations with the returned product, e.g. a
safety datasheet in accordance with EN 91/155/EEC.
• Remove all signs of fluids. Pay special attention to the grooves for seals and crevices
which could contain residues. This is particularly important if the substance is
hazardous to health, e.g. flammable, toxic, caustic, carcinogenic, etc.
Note!
You can find a copy of the "Dangerous Goods Sheet" at the end of this Operating
Instructions.
Caution!
• Do not return any devices if you cannot be entirely sure that you have completely
removed all traces of hazardous substances, e.g. any media which have penetrated
crevices or diffused through plastic.
• Costs incurred for waste disposal and injury (burns, etc.) due to inadequate cleaning
will be charged to the owner-operator.
1.5

Notes on safety conventions and icons

Perfect and reliable device operation is only guaranteed if you observe the safety
instructions in these Operating Instructions . The safety instructions contained in these
Operating Instructions are indicated using the following symbols:
Warning!
"Warning" draws attention to activities or procedures that can lead to injuries to persons
or to safety risks if not carried out properly. Observe the work instructions closely and
proceed with care.
Caution!
"Caution" draws attention to activities or procedures that can lead to defective operation
or to destruction of the device if not carried out properly. Follow the instructions carefully.
Note!
"Note" draws attention to activities or procedures that have an indirect effect on
operation, or can trigger an unforeseen device reaction if not carried out properly.
1 Safety instructions
61