Herunterladen Inhalt Inhalt Diese Seite drucken

Creating Switching Programmes - Endress+Hauser asp-station 2000 Betriebsanleitung

Vorschau ausblenden Andere Handbücher für asp-station 2000:
Inhaltsverzeichnis

Werbung

6 Commissioning
Creating switching
programmes
86
• Programme end: the unit stops sampling automatically when it has run through the set
programme.
• No: the unit runs through the programme in an infinite loop. Do not forget to empty the
bottles.
• Time: the sampling programme stops at a settable time.
You can choose between continuous operation and operation at different intervals for
the operating mode.
• Day: operating time at two settable times per day.
• Week: operating time on three settable days per week.
• Interval: operating at specific time intervals.
Synchronisation
Menu structure:
Program 1
Name
Program 1
Sample >
Distribution >
Start-Stop >
-mode
Synchronisation >
Parallel sample >
Esc
â
á
<-'
Esc
Fig. 33: Synchronisation menu structure
You can use synchronisation to assign specific filling times to specific bottles. In this
way you could fill bottle 1 between 00:00 and 02:00 and bottle 2 between 02:00 and
04:00 etc. For this, you have the following options:
• AUT-button: the sampling and bottle change times are not synchronised.
• Synchronisation TIME: sampling starts with the first bottle. The change to the next
bottle is synchronised. Example: a time of 2 hours was set for the bottle change and
the point 00:00 was set for the synchronisation. If the programme is started at 05.23,
bottle 1 is filled. The system then changes to bottle 2 at 06.00, to bottle 3 at 08.00 etc.
• Synchronisation TIME+BOT.: each bottle is allocated a specific filling time. Example:
00:00-02:00: bottle 1; 02:00-04:00: bottle 2; 04:00-06:00: bottle 3, etc. For example is
you start the programme at 10:00, the unit will start filling bottle 6.
6.4.6

Creating switching programmes

Sample mode
Menu structure:
switch 1
Sample >
Distribution >
Parallel sample >
Esc
â
<-'
Fig. 34: Sample mode menu structure
In the switching programmes, like in the main programmes, you can trigger sampling
by time, quantity, flow or an external signal.
Synchronisation
aut-button
: time
time
time+bot.
â
á
<-'
Sample
-mode
:
time
time
:
00:15 ext. sig.
volume
:
100ml flow
shots
:
Esc
â
á
<-'
ASP station 2000
time
quantity
01 once
Endress+Hauser

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis