Extended Settings Of Kvm-Over-Ip Connection; Limiting The Bandwidth - G&D VisionXS-IP-C-DP-UHR Installation Und Bedienung

6. Enter/edit the following data:
Name:
Hostname:
Control port:
Select-Keys
NOTE:
In the Hostname
the
Detected devices
(computer modules and matrix switches).
Select the desired remote station and press
remote station.
7. Press to save your settings.
F2
How to delete a remote target:
1. Use the local hotkey
2. Press F11 to open the Configuration menu.
3. Select the entry KVM Connection
4. Select the entry
Remote target
5. Use the
arrow keys
press the F4 key.
6. Confirm the safety prompt to delete the remote target.

Extended settings of KVM-over-IP connection

Limiting the bandwidth

By default, the KVM extender uses the maximum available bandwidth of a Gigabit
Ethernet. By means of manual bandwidth management you can adapt the transmis-
sion to different bandwidth requirements.
Establishing a KVM-over-IP™ connection for the first time
Enter the name of the G&D remote station to be
displayed in the Select menu.
Enter the IP address/host name of the
G&D remote station.
Enter the number of the
in the G&D remote station.
Enter the desired select key.
field, you can use the key combination
dialog. This dialog shows you all unpaired remote stations
Alt + Num to open the OSD of the user module.
and press
and press
Enter
to select the remote target you want to delete and
Control port configured
Enter to apply the IP address of the
Enter .
.
G&D VisionXS-IP-C-DP-UHR · 22
Ctrl+F8 to open