Selecting A Keyboard Layout For Inputs Via Osd - G&D VisionXS-IP-C-DP-UHR Installation Und Bedienung

Configuration
1. In the menu, click on
2. Click on the computer module (CPU) you want to configure and then click
on
Configuration
3. Click on the tab
4. Click on the tab
workstation (on the
Click on the tab
workstation (on the
5. In the
Screensaver (minutes)
the screensaver.
Entering the value 0 disables the screensaver.
6. Click on Save

Selecting a keyboard layout for inputs via OSD

If the on-screen display shows other characters than entered on the console key-
board, the keyboard layout has to be adjusted.
Make sure which keyboard layout the connected keyboard uses and configure it in
the settings of the user module.
How to change the keyboard layout of the keyboard of the user module:
1. Press
Ctrl+Num
2. Select the row
3. Under OSD key. layout

German

English (US)

English (UK)

French

Spanish

lat. American

Portuguese

Swedish
4. Press to save your settings.
F2
47 · G&D VisionXS-IP-C-DP-UHR
KVM extender
.
.
General
CPU if you want to configure the screensaver of the local
module).
CPU
if you want to configure the screensaver of the remote
CON
module).
CON
row, enter the waiting time (1 to 999 minutes) of
.
(default) to open the on-screen display.
and press
Console setup
press F8 to select one of the following options:
.
.
Enter