Operation; Ip-Mux Functionality - G&D VisionXS-IP-C-DP-UHR Installation Und Bedienung

Operation

You can operate the computer connected to the
the remote console of the user module.
NOTE: The connection between the computer module and the user module is
established automatically after the modules are started.

IP-MUX functionality

The modules of the VisionXS-IP
ity to access different computer modules (one after the other).
IMPORTANT: A user module can only be connected to one computer module at a
time!
To use this function, you can connect a maximum of 20 computers to separate com-
puter modules and configure these computer modules as remote targets (see
page 21 ff.) in the user module.
The configured remote targets can be connected via the local OSD of the user module.
How to access a remote target via on-screen display:
1. Start the local on-screen display with the
Select
Sort. Alph+
Search .......................
Remote target #1
Remote target #2
Remote target #3
ESC
2. Use the arrow keys
3. Press Enter .
How to disconnect a remote target:
1. Start the local on-screen display with the
2. Press the key combination to disconnect the active connection to the
Ctrl+D
remote target.
series offer with the
to select the remote target to be accessed.
VisionXS-IP-CPU computer module at
IP-MUX functionality the possibil-
Alt+Num hotkey (default).
IPCON
F11:Config
Alt+Num hotkey (default).
G&D VisionXS-IP-C-DP-UHR · 14
Operation