Configuring A Kvm-Over-Ip Connection - G&D VisionXS-IP-C-DP-UHR Installation Und Bedienung

4. Select the entry Interfaces
5. Enter the following data under
Global
Press
preferences:
 Static:
 DHCP:
Hostname: Enter the device hostname.
Domain: Enter the domain the device is to belong to.
Gateway: Enter the gateway IP address.
DNS Server 1: Enter the IP address of the DNS server.
DNS Server 2: Optionally, enter the IP address of another DNS server.
6. Press F2 to save your settings.

Configuring a KVM-over-IP connection

The of the user module (host) as well as the
IP address
module must be specified to establish a
puter module.
The configuration of both the
exchanged between the two modules.
NOTE: The configuration of both the
automatically exchanged between the two modules.
How to configure the ports of the KVM-over-IP connection:
1. Use the local hotkey
2. Press to open the Configuration menu.
F11
3. Select the entry
KVM Connection
4. Enter the following data under
Control Port:
Communication Port:
Data Port:
5. Press F2 to save your settings.
Establishing a KVM-over-IP™ connection for the first time
and press Enter .
Main Network
F8 to select the global preferences:
uses static settings.
obtains settings from a DHCP server.
KVM-over-IP
communication ports
communication ports
Alt + Num to open the OSD of the user module.
and press
Enter
Local :
Enter the number of the port you want to use.
Enter the number of the port you want to use.
Enter the number of the port you want to use.
:
control port
connection through the com-
and the data ports are automatically
and the
.
G&D VisionXS-IP-C-DP-UHR · 20
of the computer
are
data ports