Troubleshooting; Possible Cause - Silvercrest SIKP 2200 A1 Bedienungs- Und Sicherheitshinweise

Troubleshooting

Problem
Induction plate does
not work.
2 ] [
Heating zone
does not get hot.
E0 is shown in the
[ ]
display .
E1, E2, E3 or E4 is
shown in the display
[ ]
.
E5 is shown in the
[ ]
display .
E6 is shown in the
[ ]
display .

Possible cause

1 ] [
The power plug is not
connected.
Child lock is activated.
Cookware not suitable for
induction.
No pot or pan is on the
2 ] [
heating zone .
Cookware is not suitable for
induction.
Cookware is too small in
diameter or not standing
centrally on the heating
2 ] [
zone .
Technical fault
Protection for overheating
2 ] [
of the heating zone
Protection for overheating
of the product
Solution
Connect the power plug
socket-outlet.
Deactivate the child lock (see "Child lock").
Use only cookware that is suitable for
induction.
Place a pot or pan on the heating zone
Use only cookware that is suitable for
induction.
Only use cookware with a base diameter of
between 10 and 22 cm and place it on the
centre of the heating zone
Contact our hotline (see "Warranty").
Wait for the product to cool down.
When the temperature gets lower, press
6 ] [
and hold for 2 seconds to restart the
product.
1 ] [
to a suitable
2 ] [
.
2 ] [
.
GB 21