Silvercrest SIKP 2200 A1 Bedienungs- Und Sicherheitshinweise Seite 10

The product is not to be used
if it has been dropped, if there
are visible signs of damage.
Before connecting the product
to the power supply, check that
the voltage and current rating
corresponds with the power
supply details shown on the
product's rating label.
Regularly check the power
plug and the power cord for
damages. If the power cord is
damaged, it must be replaced
by the manufacturer, its service
agent or similarly qualified
persons in order to avoid a
hazard.
Protect the power cord against
damages. Do not let it hang
over sharp edges, do not
squeeze or bend it. Keep the
power cord away from hot
surfaces and open flames.
Operation
Do not move the product while
it is in operation.
Do not place the product on
hot plates (gas, electric, coal
cooking range etc.). Operate
the product on a level, stable,
clean, heat-resistant and dry
surface.
Do not cover the product while
it is in use or shortly after use,
when it is still hot.
Make sure that the power cord
does not come in contact with
the cooking zone.
The use of extension cords is
not recommended.
Lay cords in such a way that
they may not be tripped over
or otherwise damaged.
The product is not intended
to be operated by means of
an external timer or separate
remote-control system.
GB 11