Herunterladen Inhalt Inhalt Diese Seite drucken

Operation; Power Level And Temperature Setting; Timer - Silvercrest SIKP 2200 A1 Bedienungs- Und Sicherheitshinweise

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 100

Operation

NOTES:
Use suitable pots or pans with flat, even
bases in order to achieve better heat
transmission.
Use pots or pans matching the hob diameter.
The product emits a beep each time a button
is pressed.
Switching on standby mode
Place a filled pot or pan on the heating
2 ]
[
zone
.
Connect the power plug
socket-outlet.
The product emits a beep.
All indicators on the control panel
for 1 second.
[
]
The display
shows -L-.
The product is in standby mode.
NOTE: When the temperature of the
[
2 ]
heating zone
is higher than 60 °C, the
[
]
display
shows -H-.
Switching on program selection mode
Press and hold
lights up.
[
]
The display
shows ON.
The product emits 1 beep.
The product is now in program selection
mode.
Select a cooking mode
(see "Cooking modes").
NOTES:
Switching back to standby mode:
6 ]
[
Press
.
If no cooking mode is selected for
30 seconds, the product automatically
switches to standby mode.
1 ]
[
to a suitable
[
]
flash
6 ]
[
for 2 seconds.
Power level and temperature
setting
Adjust the following values:
Power level (in 200 W increments)
Temperature (in 20 °C increments)
[
4 ]
[
Press +
or –
Button Power/temperature
Increase power/
[
4 ]
+
temperature
Decrease power/
[
]
temperature

Timer

NOTE: Check the availability of the timer
in the desired cooking mode: Refer to the
"Cooking modes" table
Select a suitable cooking mode
(see "Cooking modes").
Enter the timer:
[
]
Press
.
Default time:
30 minutes
Adjust the timer:
4 ]
[
Press +
or –
increments.
Press and hold +
10 minute increments.
Button Setting the timer
Increase time
[
4 ]
+
Decrease time
[
]
Activating the set timer: Press
or wait for 5 seconds for the timer to activate
automatically. The set time flashes 4 times in
[
]
the display
.
For the remainder of the set time, the display
toggles between the set power/temperature
and the remaining cooking time.
]
.
(max. 2000 W,
240 °C)
(min. 200 W,
60 °C)
[
]
for 1 minute
[
4 ]
[
]
or –
for
(max. 3 hours)
(min. 1 minute)
[
]
again
GB
13

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Sikp 2000 f1

Inhaltsverzeichnis