Delay Timer; Child Lock; Switching Off The Product - Silvercrest SIKP 2200 A1 Bedienungs- Und Sicherheitshinweise

Once the timer counted down to 0, the
product switches off.
The product emits 5 beeps.
Switching off the product before the timer
has counted down to 0:
[ 6 ]
Press .
Resetting the timer:
[ ]
Press .

Delay timer

NOTE: Check the availability of the delay
timer in the desired cooking mode: Refer to
the "Cooking modes" table
Press and hold
lights up.
[ ]
The display shows ON.
The product emits 1 beep.
Enter the delay timer:
[ ]
Press .
Default delay time:
30 minutes
Adjust the delay timer:
[ 4 ]
– Press + or –
increments.
– Press and hold +
10 minute increments.
Button Setting the delay timer
Increase time
4 ] [
+
Decrease time
[ ]
–
Choose a suitable cooking mode
(see "Cooking modes").
Once the delay timer has counted down,
the selected cooking mode switches on. The
product is now in the pre-selected cooking
mode.
If no further button is pressed, the product
switches to standby after maximum 2 hours
of cooking.
Cancelling the delay timer:
[ 6 ]
Press .
14 GB
6 ] [
for 2 seconds.
[ ]
for 1 minute
4 ] [ [ ]
or – for
(max. 24 hours)
(min. 1 minute)

Child lock

Activating the child lock:
[
– Press and hold
– lights up.
Deactivating the child lock:
[
– Press and hold
– goes off.
NOTES:
Product in standby mode: You can
activate the child lock when the product
is in standby mode. This action locks the
6 ] [
button .
To turn the product on, first deactivate the
child lock.
Product turned on: You can activate
the child lock while the product is on. The
product continues to operate according to its
most recent settings.
The product can still be switched off by
[ 6 ]
pressing .
All other buttons are blocked until you
deactivate the child lock.
Switching off the product
In cooking mode, the product switches to
standby mode if no button is pressed for
2 hours.
Switching from cooking mode to standby
mode:
[ 6 ]
Press .
If the product is hot, the fan
run for some time to cool down the product.
]
for 2 seconds.
]
for 2 seconds.
[ ]
continues to