Cleaning And Storage; Before First Use; Positioning The Product; Suitable Cookware - Silvercrest SIKP 2200 A1 Bedienungs- Und Sicherheitshinweise

When the product is in use,
ensure that there are no easily
flammable materials close to
the product (e.g. dishcloths,
oven cloths).

Cleaning and storage

m WARNING! Risk of
injury! Disconnect the
product from the power supply
before cleaning work and
when not in use.
Do not store the hot product
in a cupboard or in the
packaging.
Do not pull the power plug out
of the electrical outlet by the
power cord.
Protect the product, its power
cord and power plug against
dust, direct sunlight, dripping
and splashing water.
Store the product in a cool,
dry place, protected from
moisture and out of the reach
of children.
12 GB
Protect the product against
heat. Do not place the product
close to open flames or heat
sources such as stoves or
heating appliances.
Before first use
Remove the packaging.
Clean the product (see "Cleaning and
care").

Positioning the product

Place the product on a flat surface that
leaves enough space for ventilation.
A minimum of 10 cm of free space must
remain between the product and the
adjacent walls (including side and back
wall).

Suitable cookware

Only use ferromagnetic cookware which is
suitable for induction hotplates. These should
be labelled accordingly when you buy the
cookware. Cookware made of non-magnetic
metals (e.g. aluminium, cooper) and other
materials (e.g. ceramics, porcelain, glass) is
not suitable.
The base of the cookware must be able to
stand flat on the induction hotplate.
The cookware must be smooth and have a
diameter of between 10 and 22 cm.
NOTE: If the cookware is not the right
diameter or is made of unsuitable material:
– The heating zone switches off
automatically.
– A beep sounds.
[ ]
– The display shows the error
message EO.