Enhanced Hei-Torque Ultimate Functions; Timer Function - Heidolph Hei-TORQUE Expert Betriebsanleitung

Operation
Start and stop the rotational movement at the switched on device using the [
on/off
] swipe field (see also section "Stirrer on/off swipe field" on page 60):
➜
Swipe a finger from left to right or from right to left over the field to start and
re-stop the rotational movement.
After a process, stop the rotational movement actively with the
swipe field as described above.
Otherwise the device behaves as described in section "Automatic
restart" on page 66 and possibly restarts automatically!

Enhanced Hei-TORQUE Ultimate functions

The functions described in the following sections are only imple-
mented in Hei-TORQUE Ultimate type devices!

Timer function

The timer function of the Hei-TORQUE Ultimate type devices can be used to preselect a
required operating period.
Set the timer as follows:
➜
Use the push-and-rotary control to select the
(font color changes to orange).
➜ Press the push-and-rotary control to confirm.
➜ Use the push-and-rotary control to set the required duration:
– Adjustment Range: 1 min – 24 h
➜ Press the push-and-rotary control to confirm.
➜ The timer is started on starting the rotational movement.
If the timer is running, the preset time is shown on the display to
the nearest minute and the expired time is shown to the nearest
second. At the same time, an alarm clock/timer symbol appears at
the top left edge of the screen.
The timer must be reset to [
The rotational movement can be stopped at any time, even while
the timer is running!
Timer
option on the Start screen
0
] to deactivate it.
70
Stirrer