Standard Input - Balluff BNI IOF-329-P02-Z038 Betriebsanleitung

BNI IOF-329-P02-Z038
Safe I/O Module, Safety over IO-Link
IP67 Module
12
Linking PROFIsafe process data with program modules
12.3 Safe output The output data are contained in the first byte of the PROFIsafe output user data. The table
address range below shows the assignment of the individual bits.
Each output signal (per port) is controlled by a single bit.

12.4 Standard input

The non-safe (standard) input signals of the multi-function ports are transmitted as follows:
address range
12.5 Standard output
The non-safe (standard) output signals of the multi-function ports and the control signals of the
address range
display LEDS (see Display properties starting page 26) are transmitted as follows:
www.balluff.com
A-Port
Signal designation (F-DO)
Pin No.
Telegram byte
Telegram bit
5) Bits 0, 1, 2, 3, 6 and 7 of byte 0 are not filled and are not evaluated by the safe I/O module
I port
Signal designation (DI)
Pin No.
Telegram byte
Telegram bit
6) Bits 0...5 of byte 0 are not filled and are not evaluated
I port
Signal designation (DO)
Pin No.
Telegram byte
Telegram bit
Bits 0...5 of byte 0 are not filled and are not evaluated.
7)
LEDs
Color
Telegram byte
Telegram bit
8) Bits 2...7 of byte 1 are not filled and are not evaluated.
Actuator control
4
1
4
0
5)
4
Standard input signal
6
3
5
0
6)
6
Standard output signal control
6
3
8
0
7)
6
Display LED control
left and right
Red Green
1
8)
0
english
5
1
4
5
7
3
5
7
7
3
8
7
1
83