Balluff BNI IOF-329-P02-Z038 Betriebsanleitung Seite 177

BNI IOF-329-P02-Z038
Safe I/O Module, Safety over IO-Link
IP67 Module
10
Configuring the I/O ports
Figure 56: TIA, Parameter for enabling the safe input 1 or 2
Figure 57: Step 7, Parameter for enabling the safe input 1 or 2
www.balluff.com
Note
If the parameter Activate safe input x on a port was set to the value Safe input
disabled, the parameter Activate test pulses for safe input for this input must be set
to the value Test pulses disabled.
If this setting is not made, the configuration in the downstream P-Tool is considered to
be invalid and is rejected or a warning is issued.
If both port input signals and the associated test pulses are disabled, the port will not
have any safety function. The standard inputs/outputs on ports 6 and 7 may still be
used.
english 59