Balluff BNI IOF-329-P02-Z038 Betriebsanleitung Seite 216

BNI IOF-329-P02-Z038
Safe I/O Module, Safety over IO-Link
IP67 Module
15
Diagnostics
Error code
Display PROFINET
48
49
50
51
52
internal
53
54
55
56
57
0x02
58 external
0x0039
59 internal
60 0x05 external
61 external
62
63
64
internal
65
66
67
68
98 english
Error
Cause
class
Memory error
Software procedure
error
Memory error
Microcontroller self-test
failed
Internal device
Stack pointer test failed
error
Data in EEPROM is
contradictory
Hardware check failed
Internal communication
error
Voltage supply, 7/8"
Ambient connector outside
conditions specification (over- or
undervoltage
Internal device Analog-digital converter
error defective
Ambient Ambient temperature
conditions outside specification
Actuator voltage supply,
Ambient 7/8" connector outside
conditions specification (over- or
undervoltage
Low-side switch testing
failed
High-side switch testing
failed
External watchdog test
failed
Internal device
error Internal input test failed
Bootloader error
Software procedure
error
CPU data exchange
error
Trigger Effect Remedy
Restart device and replace if
needed.
Check sensor/actuator voltage
supply (US/UA). Restart device
and replace if needed.
Restart device and replace if
needed.
Check ambient conditions and
take internal heating of the
device into account. Restart
device and replace if needed.
Check actuator voltage supply
(UA). Restart device and
replace if needed.
Check whether the actuators
are referenced to an external
ground potential. Restart
device and replace if needed.
Restart device and replace if
needed.
Check ground connection,
restart device and replace if
needed.