BNI IOF-329-P02-Z038
Safe I/O Module, Safety over IO-Link
IP67 Module
8
Configuration of the PROFIsafe connection
46
english
F_Dest_Add
PROFIsafe destination address (F-Address) which the PROFIsafe F-device (here: safe I/O module
– BIN IOF-329-P02-Z038) uses as its identification/address in the network. The destination
address value determined in the configuration software must agree with the destination address
set in the safe I/O module (see Section 6.6 Setting F-address on display on page 33).
Default setting: 2 (see Figure 38, Destination address freely configurable between 1...9999,
limited by the safe I/O module).
Figure 38: TIA, Parameter F_Dest_Add
Figure 39: Step 7, Parameter F_Dest_Add
Note
Each address may be used only once in the PROFIsafe network.