Balluff BNI IOF-329-P02-Z038 Betriebsanleitung Seite 204

BNI IOF-329-P02-Z038
Safe I/O Module, Safety over IO-Link
IP67 Module
13
Finishing projecting
86 english
3. In the following dialog field stat the Balluff Safety Plausibility Checking Tool.
Figure 81: Starting P-Tool dialog
Figure 82: Step7, Starting device tool
⇒ The configuration of the selected safe I/O module is sent to the P-Tool. If plausibility errors
are reported in the configuration they should be checked and corrected. After verifying
the transmitted configuration parameters the checksum can be performed, copied and
inserted in the configuration environment (see F_iPar_CRC on page 49).