Balluff BNI IOF-329-P02-Z038 Betriebsanleitung Seite 217

BNI IOF-329-P02-Z038
Safe I/O Module, Safety over IO-Link
IP67 Module
15
Diagnostics
Error code
Error
class
Display PROFINET
69 0x004B external
70
71
72
73 internal
75
76
77
78
internal
79
80 external
www.balluff.com
Cause Trigger
Configuration F_iPAR_CRC
error comparison faulty
Software procedure
error
Input test pulse faulty
Internal device PROFIsafe driver
error defective
CPU data exchange
error
Internal device
Memory error
error
Input wiring
Input delay too short
(sensors)
Effect Remedy
Check system compatibility
(see Section 2.8) and correct if
needed, reload configuration,
recalculate iPar_CRC in P-Tool
and send to controller.
Acknowledge device on
controller side.
Check ground connection.
Restart device and replace if
needed.
Check input port configuration
(increase input delay if
necessary). Acknowledge
device on controller side.
english 99