Packaging Content; Setup - Canton Smart Sounddeck 100 Kurzanleitung

English

PACKAGING CONTENT

Carefully unpack the Sounddeck 100 and check that the delivery content is
complete and undamaged. If any part is damaged, do not use it, but contact
our service department (see back cover). Please keep the packaging during
the warranty period.
Delivery content:
1x Smart Sounddeck 100
1x Smart-remote
1x Power cord
1x HDMI cable (3m)
1x Optical digital audio cable (1,5m)
1x Coaxial digital audio cable (1,5m)
1x Analog stereo audio cable (1,5m)
1x Short manual

SETUP

Place the Sounddeck 100 in the desired location and connect it to the power
outlet using the power cord. To connect the Sounddeck 100 to your TV or
other devices, please make sure that they are connected to the mains supply.
If you want to connect your Sounddeck 100 to your WiFi network, make sure
your WiFi router is active and has access to the internet.
26