Connection Via Bluetooth Wireless Technology - Canton Smart Soundbar 9 Kurzanleitung

English
CONNECTION VIA BLUETOOTH
You can conveniently connect the Smart Soundbar 9 to your (mobile) device via
Bluetooth wireless technology. For this, please proceed as follows:
®
Establish connection via Bluetooth
Select the Bluetooth
1
or down „ / " on the Smart-remote.
Now, press the button „Bluetooth Pairing" on the Smart-remote. The
2
display indicates [BTP].
Start the search on your (mobile) device.
3
Select Smart Soundbar 9xxx as the playback device.
4
Note:
• If you have assigned a name to the Smart Soundbar 9 during network
setup (e.g. living room), this name is also displayed here.
The connection is established automatically resp. after confirmation and
5
the message [BT-] followed by [CON] appears on the display of the Smart
Soundbar 9.
Start playback of a track on your (mobile) device and the sound is
6
automatically played back via the Smart Soundbar 9.
If the connection has failed, you receive the message [FAI].
7
If the (mobile) device requires a code, enter 0000.
8
If [BT-] and [DIS] appears on the display, your (mobile) device is out of
9
range or logged out.
40
WIRELESS TECHNOLOGY
®
wireless technology
®
input [BT] by (repeatedly) pressing the arrow key up
®