Scrapping Info; Environmentalinformation - ATH-Heinl ATH LUX 3D Bedienungsanleitung

SCRAPPING INFO

If the machine is to be scrapped, remove
all electrical, electronic, plastic and
metal components and dispose of them
separately, as provided for by local leg-
islation (Fig 36-37).
ENVIRONMENTAL
INFORMATION
The following disposal procedure must
be applied to the machines having the
crossed-out bin symbol on their data
�
plate
This product may contain substances that
can be hazardous to the environment and
to human health if it is not disposed of
properly.
The following information is therefore
provided to prevent the release of these
substances and to improve the use of
natural resources.
Electrical and electronic equipment must
never be disposed of in the usual municipal
waste but must be separately collected
for their proper treatment.
The crossed-out bin symbol, placed on
the product and on this page, reminds the
user that the product must be disposed of
properly at the end of its life.
‑
Thus, the hazardous consequences that
non specific treatments of the substances
contained in these products, or improper
use of parts of them, may have on the
environment or on human health are
prevented. Furthermore, this helps to
recover, recycle and reuse many of the
materials contained in these products.
Electrical and electronic manufacturers
and distributors set up proper collection
and treatment systems for these products
for this purpose.
Contact your local distributor to obtain
information on the collection procedures
at the end of the life of your product.
When purchasing this product, your
distributor will also inform you of the
possibility to return another end-of-life
piece of equipment free of charge as long
as it is of equivalent type and had the
same functions as the purchased product.
Any disposal of the product performed in
a different way from that described above
will be liable to the penalties provided for
by the national regulations in force in the
country where the product is disposed of.
Further measures for environmental
protection are recommended: recycling
of the internal and external packaging of
the product and proper disposal of used
batteries (only if contained in the
product).
Your help is crucial to reduce the amount
of natural
manufacturing electrical and electronic
equipment, minimize the use of landfills
for product disposal and improve the
quality of life, preventing potentially
hazardous substances
released in the environment.
resources used
from
for
being