Service Procedure Screen; Unauthorised Uses - ATH-Heinl ATH LUX 3D Bedienungsanleitung

the F11
the values;
- lift the vehicle;
- press F3
lifting;
- carry out the adjustment;
- select from the F11 menu
the "End of adjustment with car lifted"
option to lock (freeze) the values again;
- lower the vehicle;
- press F3
lowering;
SERVICE PROCEDURE
SCREEN
The service window is accessed by select-
ing the "Service Programs"option from the
menu of the aligner program
F11
main window.
A list of the options available is displayed:
• Demo;
• Target Test;
• Technical Assistance;
Select an option and press Enter to access
the procedure chosen.
Select the "Demo" option and press enter to
enable/disable the program in demo mode.
Target cannot be used in demo mode, all
values viewed are random.
Enabling/disabling of this function is in-
menu to lock (freeze)
to confirm vehicle
again to confirm vehicle
Demo
dicated by an icon
right-hand corner of the job window.

UNAUTHORISED USES

It is forbidden to use the aligner for any
purpose other than measuring the charac-
teristic alignment angles of a vehicle (see
the "Characteristic Angles" section).
WARNING
Use of the aligner for any purpose other
than its original function releases the
manufacturer from all responsibility for
any damage or injury that may result.
It is recommended to use the Personal
Computer installed in the central unit only
with the programs supplied by the producer
CAUTION
The software in the HARD DISK and in
the upgrade CD ROMs are the property of
the producer and can be used only with
the personal computer supplied with the
machine.
CAUTION
It is highly recommended not to use the
Personal Computer for games or with
other software based on unauthorised
copies, to avoid reducing system as well
as people's safety.
This is mandatory to avoid any possible
contamination from computer viruses.
In any case, it is recommended to have
and authorised Technical Service Centre
to control the compatibility of all original
software not supplied by the producer
CAUTION
Do not remove the Personal Computer from
its installation position to avoid damaging
the connections.
in the lower