Error Screen - ATH-Heinl ATH LUX 3D Bedienungsanleitung

Select data summary
Select steering type
Select rear adjustment
Skip execution second steering
Select Saving and printing
Skip ROC
Skip summary
Data summary
Skip steering
Steering at 10 20
If adjustable
Always
recalled
Skip second
steering
Second
steering
Do not save
or print
Save
Save and print
The alignment procedure can be customised
by combining the options mentioned above,
in a practical and rapid way, to speed up
the operations.
The working procedure can be opened and
modified from any screen you are in, also
while the alignment procedure is being
executed.
Use the á and â directional arrows to
customise options and confirm by press-
ing enter. To exit this screen and save the
settings, press F3, to exit without saving,
press F2.
Exiting the screen saving the options
established implies the immediate
execution of the procedure selected.

ERROR SCREEN

The screen shown in figure 33 is displayed
when there is a
measurement error.
In these cases, the cause of the error must
be corrected in order to resume normal
operation.
However, if this is not possible, press the
key from the starting screen to
exit the program correctly.
Afterwards, call in the Technical Support
Service.
Print
transmission or