Measurement Summary Screen; Personalised Printout Window; Jack & Hold Program - ATH-Heinl ATH LUX 3D Bedienungsanleitung

- Select from the F11 menu
the "De-freeze caster data" option to
unlock the caster value;
- Adjust the toe.
• If a clamp or a wheel has to be demounted
in order to adjust caster, a new compensa-
tion must be carried out on that wheel.
MEASUREMENT
SUMMARY SCREEN
The measurement summary screen
�
(Fig 34) may be recalled from the adjust-
ment screens of the front or rear axles
by selecting from the F11
the "Data Summary" option.
This is to display the adjustment meas-
urements (databank, if present) and the
current adjustment values.
The display is divided into two pages,
one for the front axle and another for
the rear axles data.
The following keys are active in this
screen:
F1 displays the on-line Help
function
F2 goes back to the previous
screen
F3 (or Enter) goes to the next
screen
displays the data summary
F6
of the rear axle (visible
when the data summary of
the front axle is displayed)
F6
F11
These are the menu options:
• End of work (Goes back to the starting
screen)
• Setup (opens the contextual set-up on
the screen where you are)
• Operating sequence (recalls the align-
ment execution setting screen, according
to the user's preferences)
• Help (recalls the Help contextual screen
on the screen where you are)
PERSONALISED PRINTOUT
menu
Displayed at the end of a measurement
cycle.
Used to set the advertising message that
will appear on the printout, together with
the number of copies.
JACK & HOLD PROGRAM
This program is started by selecting the
"Adjustment with car lifted" option from
the F11
It allows the vehicle characteristic angles
to be adjusted with the axle concerned
lifted, by first locking ("freezing") the
value displayed for the vehicle lowered,
so that the variation caused by the lifting
operation is ignored.
Proceed as follows:
- with the vehicle lowered, select the
"Adjustment with car lifted" option from
displays the data summary
of the front axle (visible
when the data summary of
the rear axle is displayed)
Displays the menu with the
contextual functions.
WINDOW
�
menu