Key To Caution And Instruction Labels - ATH-Heinl ATH LUX 3D Bedienungsanleitung

Operators are forbidden to use the ma-
chine under the influence of alcohol or
drugs that could affect his/her physical
and mental capacity.
However, it is absolutely necessary to:
• Read and understand all instructions on
how to use the machine.
• Make sure to have a thorough knowledge
of the machine capabilities and features.
• Keep unauthorized persons well clear of
the area of operation.
• Make sure that the machine has been
installed in compliance with legislation
and standards in force.
• Make sure that all machine operators are
suitably trained, that they are capable
of using the machine correctly and that
they are adequately monitored during
their work.
• Do not touch power lines or electrical
equipment before making sure that power
has been cut off.
• Read this manual carefully and learn how
to use the machine correctly and safely.
• Always keep this user manual in a place
where it can be readily consulted when
working with the machine and consult it
whenever you are in need of confirmation
or explanations.
WARNING
Do not remove or deface the safety
Danger, Warning or Instruction decals.
Replace any missing or illegible de-
cals. If one or more decals have been
detached or damaged, replacements
can be obtained from your nearest the
producer dealer.
• When using the machine and carrying out
maintenance on
standardised
prevention regulations for high voltage
industrial equipment.
• Any unauthorised alterations made to the
machine automatically release the manu
it, observe
industrial accident
facturer from any liability in the case of
damage or accidents resulting from such
alterations. Specifically, tampering with
or removal of the machine safety devices
is a breach of the regulations relating to
Safety at work.
WARNING
Infrared Radiation!
Do not get at close range or exposed too
long to infrared radiation.
Do not observe directly with optical
instruments.
KEY TO CAUTION AND
INSTRUCTION LABELS
WARNINGS FOR VERSIONS WITH MOVE-
Crushing
Presence
parts. Contact
moving
result in an accident.
Keep other people away
from the aligner.
Keep hands and other
body parts away from
moving parts.
Keep your fingers and
hands away from the
vertical
the
mechanism
measuring bar.
Always inspect the machine thoroughly
before using it. Missing, broken, or worn
Unplug the power supply
cable before carrying out
maintenance/technical
operations on the machine.
MENT CAMERA
hazard.
of moving
with
parts could
movement
of the