Introduction - ATH-Heinl ATH LUX 3D Bedienungsanleitung

INTRODUCTION

The purpose of this manual is to provide
the owner and machine operator with
effective, safe instructions for the use
and maintenance of the aligner.
If these instructions are followed
carefully, the machine will give you the
efficient and long-lasting service that
has always characterized the producer
products, thus making your work
considerably easier. The following
paragraphs define the levels of danger
regarding the machine associated with
the warning captions found in this
manual:
DANGER
Refers to immediate dangers that result
in serious injuries or even death.
WARNING
Refers to dangers or procedures that are
not totally safe and that could result in
serious injuries or even death.
CAUTION
Refers to dangers or procedures that
are not totally safe and that could result
in minor injuries or material damage.
Read these instructions carefully before
operating the machine. Keep this manual
and the illustrated materials supplied
with the equipment in a folder near the
place of operation so as to allow the
machine operators to
documentation at any time.
The technical documentation supplied
is considered an integral part of the
machine; in the event of sale all relative
documentation must remain with the
equipment. The manual is only to be
considered valid for the machine serial
number and model stated on the
nameplate.
consult the
WARNING
The instructions and information de-
scribed in this manual must always be
complied with: the producer shall not be
held responsible for any operation not
specifically described and authorized in
this manual.
WARNING
The wheel aligner is a measuring tool,
so the suggestions for the adjustments
to be made on the vehicle (animations
or fixed help-on-line contained in the
aligner) are merely indicative. In any
case, before making any intervention on
the vehicle, the operator must examine
and be aware of the regulations (in other
words the
recommendations
manufacturer), and always make the
adjustments in compliance with such
priority indications.
The company declines all responsibility
deriving from the execution of such
regulations and any damage that could
eventually result.
Note
Some of the illustrations contained in this
booklet were taken from pictures of
prototypes: standard production
machines may differ slightly in certain
respects. These instructions are for the
attention of persons with basic
mechanical skills. We have therefore
omitted to provide detailed
instructions regarding, for example,
how to loosen or tighten the fixing
devices, etc.
Do not attempt to perform operations
unless properly qualified or with suitable
experience.
If necessary, please contact an authorized
Service Centre for assistance.
instructions
of the
or