Rear Axle Measurement And Adjustment Screen - ATH-Heinl ATH LUX 3D Bedienungsanleitung

• End of work (Goes back to the starting
screen)
• Setup (opens the contextual set-up on
the screen where you are)
• Operating
sequence
alignment execution setting screen,
according to the user's preferences)
• Help (recalls the Help contextual screen
on the screen where you are)
To perform the standard steering proce-
dure, follow the on-screen instructions and
proceed as described below:
• release the turntables;
• align the wheels by following the on
screen indicator until the "STOP" message
is displayed;
• turn the wheels 10° or 20° to the left
until the "STOP" message is displayed;
• wait for the data acquisition and for the
turn-right arrows to be displayed;
• turn the wheels 10° or 20° to the right
(relative to the centre position) until the
"STOP" message is displayed;
• wait for the data acquisition and for the
turn-left arrows to be displayed;
• turn the wheels back to the left to
straighten the steering.
At the end of the steering procedure, a
window is displayed, with icons indicat-
ing the operations to be performed next:
- Position the steering wheel with the
spokes straight
- Lock the steering wheel
Press F3 (Enter)
go to the next window.
Now, the system acquires and saves the
vehicle "diagnosis" data, i.e. the values
describing the status of the vehicle prior
to adjustment.
These values are then shown on the window
of the measurement data table.
(recalls the
‑
to confirm and
REAR AXLE
MEASUREMENT AND
ADJUSTMENT SCREEN
Displays the measured angles for the
vehicle rear axle and the adjustment
reference tolerances (fig.32). The values
are continually updated so that the
operator can perform the adjustments.
The following keys are active in this
screen:
F1 displays the on-line Help
function
F2 goes back to the previous
screen
(or Enter) goes to the next
F3
screen
F11 Displays the menu with the
contextual functions.
These are the menu options:
• End of work (Goes back to the starting
screen)
• Levels (displays/hides the status of the
target levels on the screen)
• Summary data (displays the vehicle data
summary screen)
• Vehicle adjustments (opens the screen
for selecting/displaying the adjustment
images of the vehicle angles)
• Adjustment with car lifted / End of the
adjustment with car lifted (accesses/
exits the vehicle registration procedure,
with the wheels lifted)
• Setup (opens the contextual set-up on
the screen where you are)
• Operating sequence (recalls the align-
ment execution setting screen, accord-
ing to the user's preferences)