Data Edit Window; Data Input Window - ATH-Heinl ATH LUX 3D Bedienungsanleitung

goes back to the previous
F2
screen
(or Enter ) confirms the
F3
selection of the job and
goes to the next screen.
prints the list of jobs.
F5
deletes a previously
F7
entered job
Displays the menu with
F11
the contextual functions.
These are the menu options:
• Start context (goes back to the screen
where the "Standard job record" data
is entered)
• Setup (opens the contextual set-up on
the screen where you are)
• Help (recalls the Help contextual screen
on the screen where you are)

DATA EDIT WINDOW

Edit screens refer to:
- Vehicle makes in databank (makes entered
by the operator)
- Vehicle models in databank (models
entered by the operator)
- Customers on file
- Vehicles on file
- Operators on file
To modify, proceed as follows:
- select the field to be modified using the
"Tab" or "Shift" + "Tab" keys (if there
are more than one field in the window)
- enter a new character/value over the
letters or numbers of the selected item
- re-enter the correct value.
To confirm the changes made and exit this
window, proceed as follows:
- press F3, you will be prompted to confirm
saving of the modified data.
- press F3 to confirm.
If you do not wish to confirm saving,
press F2.

DATA INPUT WINDOW

The data input windows refer to:
- Vehicle makes in databank;
- Vehicle models in databank;
- Customers on file;
- Vehicles on file;
- Operators on file.
To enter the data, proceed as follows:
- select the field where data are to be en-
tered using the "Tab" or "Shift" + "Tab"
keys (if there are more than one field in
the window)
- enter a character/value
To confirm the data entered and exit this
window, proceed as follows:
- press F3, you will be prompted to confirm
saving of the data.
- press F3 to confirm,
f you do not wish to confirm saving, press F2.
When entering a new item, the system
prompts users with data for a similar
vehicle to simplify the data entry
tolerance.
Remarks
Data for a new customer and/or a new
vehicle can also be entered at the end of
the measurement
procedures for a model chosen from the
vehicle databank.
In the print window, a message prompting
data to be entered will be displayed when
saving data on request has been set. A mes-
sage about the missing data is displayed
when saving data in automatic mode has
been set in the set-up. In the print window,
select the data input window from the F11
�
menu
and adjustment