Further Information - ABB FSPS-21 Benutzerhandbuch

2 3 5 4
Connection procedure

Hinweis: Zwischen dem FSPS-21 und dem STO-Anschluss des Frequenzumrichters
1. Connect the network cable to connector [X1] on the module.
dürfen keine Geräte installiert werden.
2. If you want to create a daisy chain network with the FSPS-21 modules, connect connector [X2] of the
first module to connector [X1] on the next module, and so on.
Hinweis: Für die STO-Schaltung darf im Zusammenhang mit dem FSPS-21 Modul
3. Connect the STO cable to the FSPS-21 module (black connector).
keine externe Spannungsversorgung verwendet werden.
4. ACS880: Connect the yellow connector to drive's STO connector. ACS380/580: Remove the yellow
connector from the cable and connect the wires to drive's STO connectors (see figure below).
ACS580 drive
FSPS-21
STO
Red
Black
Yellow
White
Start-up
See the user's manual.

Further information

See the latest version of FSPS-21 safety functions fieldbus
module user's manual (3AXD50000158638 [English]) in ABB
library (www.abb.com/drives/documents)
FSPS-21 manual
3AXD50000158591 Rev A (EN) 2018-02-08
5 STO connector (under connectors [X1] and [X2])
6
6 Diagnostic LEDs
7 MAC ID
Control unit
STO
34 OUT1
35
36 DGND
37 IN1
38 IN2
For more information on ABB safety information and solutions,
see ABB Safety information and solutions web page
(new.abb.com/safety)
.
Elektrische Installation 47
ACS380 drive
FSPS-21
STO
Red
Black
Yellow
White
.
ABB Safety information and solutions
Control unit
SGND
S1
S+
S2