Fig. 86:
Properties of internet protocol Version 4 (TCP/IPv4)
1 Menu item "Use following IP address"
2 "IP address" input field
3 "Sub-net mask" input field
4 "OK" button
!
IP address of the "wireless network link" must be
changed to the valid value.
1. Select the "Use following IP address" item.
2. Change the IP address in the "IP address" input field
to the valid value to configure/activate the WLAN
network adapter.
Valid network address
192.168.150.1
Tab. 32:
Valid/invalid network address
3. Confirm with the "OK" button.
4.
Close the Network link window.
WLAN network link configured.
Re-start the PC/Laptop.
5.
Perform sensor assignment.
6.
i
For sensor position assignment, refer to the
document Commissioning instructions 1690706006.
"
This completes start-up of the WLAN-Box.
Robert Bosch GmbH
Invalid network address
192.168.161.1
Technical data | FWA 4650 | 81
11. Technical data
11.1
WLAN-Box dimensions and weights
Function
Dimensions (L x W x H):
Dimensions (L x W x H)
with fastening strips:
Weight
Degree of protection
(as per DIN 40 050)
Tab. 29:
WLAN-Box dimensions and weight
11.2
Temperature and working
environment
Function
Operating temperature
Storage temperature
Temperature gradient
Rel. humidity (operation)
Rel. humidity gradient
Max. operating height
Max. transportation height
Tab. 30:
Temperature and working environment
11.3
WLAN-Box power supply unit
Function
Input voltage
Input frequency
Power
Tab. 31:
WLAN-Box power supply unit
en
Unit
Value
mm
627 x 250 x 131
647 x 250 x 131
kg
7,4
IP
54
Unit
Value
°C
+5 °C - +40 °C
-20 °C - +60 °C
°C / h
20 °C / Stunde
% / °C
10 % - 90 % (40°C)
% / h
10 % / Stunde
m
-200 m - 3000 m
-200 m - 12000 m
Unit
Value
V AC (A)
120 / 240 (2,4)
Hz
50 / 60
W
550
|
1 690 706 220
2016-09-14