Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
iCAT mini
11 Disassembly
DANGER
Risk of injury due to unexpected start
The following instructions must be followed during all maintenance, servicing, disassembly
and repair work:
• Switch off the power source.
• Close off the gas supply.
• Close off the coolant supply.
• Disconnect the coolant supply and return hoses.
• Close off the compressed air supply.
• Disconnect all electrical connections.
DANGER
Risk of burns
Risk of burns from hot coolant and hot surfaces.
• Switch off the cooling unit before starting maintenance, servicing, assembly, disassembly
or repair work.
• Check and wear your personal protective equipment.
DANGER
Electric shock
Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation and damage.
• Replace any damaged, deformed or worn parts.
NOTICE
• Only qualified personnel are permitted to perform work on the device or system.
• Consult the documentation for the welding components.
• Observe the information provided in the following section:
8 Decommissioning on page EN-25.
NOTICE
• After repeated use, it may not be possible to loosen the welding torch by hand. A suitable
tool is provided to assist with loosening. Do not use pliers to loosen the welding torch.
BAL.0361.0 • 2021-02-25
11 Disassembly
EN - 33
Werbung
Inhaltsverzeichnis
