Abicor Binzel iCAT mini Betriebsanleitung Seite 64

9 Maintenance and cleaning
9.1.4 Cleaning iCAT mini with ABIROB
We recommend cleaning the iCAT mini with wire brake and welding torch neck
®
ABIROB
1 Welding torch ABIROB
2
Protective cap
Fig. 18
1 Disassemble the welding torch (1) and neckliner.
2 Remove the protective cap (2).
3 Remove the compressed air hose (3) from the wire brake (6).
4 Unscrew the wire brake (6).
5 Remove the bellows (4).
6 Clean exposed parts with compressed air.
7 Check the wire brake (6) for proper functioning and clean as needed.
8 Remount the bellows (4), wire brake (6) and protective cap (2).
9 Mount the welding torch (1) and neckliner.
10Connect the compressed air hose (3) to the wire brake (6).
EN - 30
W 1–2 times weekly.
1
®
W 3
4
Cleaning – iCAT mini with wire brake and welding torch neck ABIROB
®
W (iCAT mini with wire brake)
2
Compressed air hose
Bellows
iCAT mini
4
3
5
6
5 iCAT mini
6
Wire brake
BAL.0361.0 • 2021-02-25
®
W