Transport And Installation - Abicor Binzel iCAT mini Betriebsanleitung

iCAT mini
6 Commissioning
DANGER
Risk of injury due to unexpected start
The following instructions must be adhered to during all maintenance, servicing, assembly,
disassembly and repair work:
• Switch off the power source.
• Close off the gas supply.
• Close off the coolant supply.
• Close off the compressed air supply.
• Disconnect all electrical connections.
NOTICE
• Note the following instructions:
 3 Product description on page EN-8

6.1 Transport and installation

DANGER
Risk of injury and device damage when handled by unauthorized persons
Improper repair work and modifications to the product may lead to serious injuries and
damage to the device. The product warranty will be rendered invalid if work is carried out on
the product by unauthorized persons.
• Only qualified personnel are permitted to perform work on the device or system.
DANGER
Electric shock
Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation and damage.
• Replace any damaged, deformed or worn parts.
• Power to the device should be disconnected when mounting all parts.
BAL.0361.0 • 2021-02-25
6 Commissioning
EN - 13