Rotax 125 MAX DD2 Einbauhinweise Und Betriebsanleitung Seite 58

Note:
If oil level is not sufficient replenish oil in the gear case, remove the air venting screw (1) and
slowly fill in oil of specification SAE 15W-40 until oil level is in the middle of the inspection glass.
Note:
Fig. 2
Note:
Seite/page 58/100
Downloaded from www.Manualslib.com
Operating Instructions 125 MAX DD2
Specification of gear oil is: Engine oil SAE 15W-40.
Hand tighten air venting screw (1)
For draining the oil from the gear case remove the magnetic oil drain plug (1) and
sealing ring (2). Clean the oil drain plug before installation, always use a new
sealing ring. See Fig. 3
manuals search engine
Fig. 3
Ausgabe/edition 01/2006