System Settings - VOLTCRAFT RS16 Bedienungsanleitung

18. SYSTEM SETTINGS

The charger's system settings contain various basic settings. At delivery the system settings
are preset to the most common values.
Depending on the rechargeable batteries you wish to charge/discharge, it may be necessary
to alter some settings.
Now continue as follows:
• In the main menu, move the control pad upward „8"
or downward „2" to select the „SYSTEM SET->"
function.
• Move the control pad to the right „6" to toggle to the
first setting function. First, the pause time between
charging/discharge cycles (e.g. in cycle mode) is
shown, see image at right.
Move the control pad upward „8" or downward „2" to select the desired setting
function.
Move the control pad to the right „6" to change a setting. The value in question starts
flashing.
Move the control pad upward „8" or downward „2" to adjust the flashing value.
Move the control pad to the right „6" to finish setting. The value in question stops flas-
hing; the value is saved. You can now select another setting function, see steps above.
To return to the main menu, move the control pad to the left „4".
Please review the information on the following pages for a description of the setting functions.
112
PROGRAM SELECT
SYSTEM SET->
Rest Time
CHG>DCHG 10Min