VOLTCRAFT RS16 Bedienungsanleitung Seite 115

Displaying battery/charger temperature
Ext.Temp
Int.Temp
Use this function to display the internal and external temperatures.
The external temperature can only be displayed when an external temperature
sensor is connected (not included, separately available).
Reset to default settings
LOAD FACTORY SET
Use this function to reset the charger to default settings.
Move the control pad to the right „6" and hold for 3 seconds. When the charger has reset, the
lower display line shows „COMPLETED" and the charger restarts and loads the main menu.
Please note that resetting the charger also restores any settings you may have made to
the default settings. Resetting also deletes the 10 memory slots (see chapter 16).
Display firmware version
VERSION
The charger's current firmware version is shown at the bottom right.
0C
19C
ENTER
1.03
115