VOLTCRAFT RS16 Bedienungsanleitung Seite 86

You can operate the charger using the 4-way control pad and the 2-line backlit LC display.
Move control pad upward „8":
Increase setting value, select function/submenu
Move control pad downward „2":
Decrease setting value, select function/submenu
Move control pad to the left „4":
Return to previous function or abort action
Move control pad to the right „6":
Confirm setting/function or start
After the charger is connected to the power supply, it emits a short beep and the LC display
lights up. The charger now shows the main menu and is operational.
Move the control pad upward or downward to select the rechargeable battery type (LiPo,
LiFe, LiIon, NiCd, NiMH, Pb), to call up a memory slot („BATT MEMORY"), to activate the
cell voltage display for lithium rechargeable batteries („LI BATT METER") or to adjust system
settings („SYSTEM SET").
Move the control pad to the right to confirm your selection and to toggle to the corresponding
submenu. You can adjust further settings or select functions/submenus from here.
Move the control pad to the left to return to the previous function/submenu (settings made in a
function/submenu are not erased).
To start the current function (e.g. charging mode) using the current settings, move the control
pad to the right and hold for 3 seconds. To stop/pause the function, move the control pad to
the left.
86