Instructions For Use - Honeywell Miller RG500 Gebrauchsanweisung

Auto/manual rope grab

Seite von 152

/ 152
Inhalt
Inhaltsverzeichnis
Lesezeichen

Inhaltsverzeichnis

Verfügbare Sprachen

Conforms to the EN 353-2:2002, EN 12841/A:2006 & EN 795/B:2012 standards

1 -

OVERVIEW

You have purchased our Class III personal protective equipment (PPE) for protection against risk of serious injury and

fatality, and we thank you for placing your trust in. In order to ensure your complete satisfaction with this product, you

must, BEFORE EACH USE, follow the instructions in this manual.

This manual covers the RG500 Auto/Manual Rope grab device for working at heights.

Working at heights is dangerous and can cause serious accidents and injuries. We remind you that you are personally

liable in case of an accident, injury or fatality either to yourself or to a third party during or following use of one of our

products.

WARNING:

We recommend you to read these instructions prior to each use. Additionally, the manufacturer or its representative

assumes no liability for use, storage or maintenance performed in manner other than described in these instructions.

Warranty cover provided under the product warranty is also subject to compliance with the manufacturer's instructions.

Failure to comply will result in the warranty being voided. This warranty is given to only one purchaser of the product

from the manufacturer, unless otherwise stipulated to the contrary by contractual provisions approved by the manu-

facturer.

IF THE PURCHASER IS NOT THE USER, HE MUST PASS ON THESE INSTRUCTIONS TO THE ACTUAL END USER.

WHENEVER POSSIBLE, IT IS STRONGLY RECOMMENDED THAT PPE IS PERSONALLY ASSIGNED TO A SINGLE USER.

IF THE PRODUCT IS SOLD OUTSIDE THE FIRST COUNTRY OF DESTINATION, FOR THE SAFETY OF THE USER, THE

DEALER MUST ENSURE THAT THE PRODUCT IS COMPLIANT WITH THE LAWS APPLICABLE IN THAT COUNTRY

AND PROVIDE INSTRUCTIONS FOR THE PRODUCT IN THE APPROPRIATE LANGUAGE, COVERING ALL THE

REQUIREMENTS OF EN 353-2:2002, EN 12841/A:2006, EN 795/B:2012 & PPE Regulation (EU) 2016/425.

PRODUCT COMPATIBILITY WITH OTHER PPE (HARNESSES, ANCHORS AND CONNECTING DEVICES):

ENSURE THAT THE PPE YOU HAVE PURCHASED IS COMPATIBLE WITH THE RECOMMENDATIONS OF OTHER FALL

ARREST SYSTEM COMPONENTS AND THAT THEIR SAFETY FUNCTIONS DO NOT INTERFERE WITH ONE ANOTHER.

A full body harness must be the only appropriate device for holding the body. It must comply with EN 361.

1 — 1 LIST OF PRODUCTS CONCERNED (see Part I - LIST OF PRODUCT CONCERNED)

1 — 2 CONTACT

35-37, rue de la Bidauderie 18100, VIERZON CEDEX – FRANCE

1 — 3 PRODUCT DESCRIPTION (see Part II - PRODUCT DESCRIPTION)

2 -

TRAINING

The use of our products is restricted to competent persons having undergone appropriate training (provided by an

authorized person or organization) or under the supervision of a competent supervisor.

The completion of this training must be recorded by the issue of a course certificate showing the date, location, name

and company of the training organization, the full name of the user, etc.

Make yourself familiar with this PPE and ensure you have fully understood how it works (see chapter 7 - USE).

Anyone performing work at heights should be in good physical condition. Certain medical conditions (medication, car-

diovascular condition, etc.) may impair safety of the user during normal use of the PPE. If in doubt, check with your

doctor.

3 -

COMPLIANCE WITH THE EUROPEAN STANDARD

The RG500 Auto/Manual Rope Grab is in conformity with following legislation:

• EN 353-2:2002 Personal protective equipment against falls from a height – Part 2: Guided type fall arresters in-

cluding a flexible anchor line. Including Optional conditioning to dust.

• EN 795/B:2012 - Personal protective equipment: Anchor devices

• EN 12841/A:2006 - Personal fall protection equipment - Rope access systems - Rope adjustment devices

• Edge tested PPE-R/11.075 version 1

• Tested with 140kg weight PPE-R/11.0622 version 1

PPE products have undergone standard examination with a notified body, certifying that all equipment and corre-

sponding instructions duly comply with Regulation (EU) 2016/425.

This product must not be contaminated with oil or used in an oil environment.