INSTRUCTIONS AND WARNINGS FOR USE AND OPERATION
Important
Besides being authorised and appropriately
documented,and if necessary,instructed and
trained, users,on fi rst usage, have to simulate
several operations to identify the controls
and main functions.
Use only as intended by the manufacturer
and never tamper with any device to obtain
performance levels outside the rated specifi -
cations.
The appliance is fi tted with the controls for use
of its main functions.
Top burner control knob: turns on and off
A)
and regulates the corresponding top burner.
Heating element control knob: for turning
B)
the oven top or bottom heating element or
both oven heating elements on and off .
Temperature regulator knob: for regulating
C)
the temperature inside the oven.
Front burner
GB
Off marker
Pilot light
marker
power marker
3320050_ut_GB_rev.1
USE AND OPERATION
DESCRIPTION OF CONTROLS
marker
A
Minimum
Before use, check that the safety devices are
properly installed and in good working or-
der.
As well as taking care to meet these require-
ments, users must also implement all safety
regulations and read the description of the
controls and the start-up procedure carefully.
Temperature light: indicates that heating of
D)
the oven is in progress, goes out when the set
temperature is reached.
Mains light: indicates that the appliance is
E)
receiving electrical power.
Thermostat light: indicates that the safety
F)
thermostat has tripped.
Rear burner
marker
A
Full
power marker
- 8 -
A
A
ENGLISH