INSTALLATION
Commissioning
12. Commissioning
12.1 Preparation
Internal anti-scalding protection via jumper slot
Jumper position
Description
43
For example in nurseries, hospitals, etc.
50
55
Max. for shower operation
60
Factory setting
No jumper
Limited to 43 °C
f Install the jumper in the required position (= temperature in
f
°C) on the "Tmax" pin strip.
96
|DHE Connect | DHE Touch
43°
50°
55°
60°
CAUTION Burns
If the water supplied to the appliance is preheated, the
internal anti-scalding protection and the temperature
limit that is adjustable by the user may be exceeded.
In such cases, limit the temperature with an upstream
central thermostatic valve (ZTA 3/4).
www.stiebel-eltron.com