Installing The Mini Wireless Remote Control - STIEBEL ELTRON DHE Connect 18/21/24 Bedienung Und Installation

INSTALLATION
Standard installation
Fitting the lower back panel section
f Fit the lower back panel section into the back panel. Check f
that both locking tabs are engaged.
f Align the mounted appliance by undoing the fixing toggle, f
aligning the power supply and back panel, and then re-tight-
ening the fixing toggle. If the back panel does not sit flush
against the wall, you can secure the appliance at the bottom
with an additional screw.
Material losses
!
The cover plate of the lower back panel section must not
bend when installed.
www.stiebel-eltron.com

11.1 Installing the mini wireless remote control

You can attach the mini wireless remote control to the wall using
the wall retainer.
f Secure the wall retainer to the wall using the adhesive pad f
provided or a suitable countersunk screw (∅ 3 mm or less).
DHE Connect | DHE Touch | 95