Programming Unit Layout ������������������������������������� 71 9.2 Minimum Clearances; Temperature Settings ������������������������������������������ 71 10. Installation; Settings - STIEBEL ELTRON DHE Connect 18/21/24 Bedienung Und Installation

OPERATION

Settings

3.1 Programming unit layout
1
2
3
1 Touchscreen
2 Touch-Wheel, selectable functions: "Temperature", "Volume"
(DHE Connect only) and "No function"
3 Loudspeaker (DHE Connect only)
The Touch-Display responds to being tapped (not "swiping"). Tap
on the desired function with your finger.
The Touch-Wheel has a touch-sensitive sensor. You can change
the setting with rotary touch.
Using the enclosed mini wireless remote control you can adjust
the temperature setting wirelessly.
www.stiebel-eltron.com
4. Settings
4.1 Temperature settings
1
2
Memory 1 Memory 2 Maximum
Weather Radio ECO
3
1 Buttons "-" and "+"; press and hold to go faster
2 Rapid selection of temperature with the memory buttons
3 Touch-Wheel
4 Mini wireless remote control buttons
- Temperature selection 20 - 60 °C (factory setting) in 0.5 °C
increments. From 43 °C (risk of scalding) the temperature
display on the Touch-Display turns red
- "OFF" = heating system switched off
DHE Connect | DHE Touch |
+
38 60
_
4
OFF 3s
71