STIEBEL ELTRON DHE Connect 18/21/24 Bedienung Und Installation Seite 77

OPERATION
Settings
Settings
You can make individual settings for currency, temperature (Cel-
sius °C/Fahrenheit °F) and volume (litres/gallons).
Menu structure
 „ Temperature memory
…  Maximum
 „
ECO
 „ Bath filling
 „ Programming unit
…  Touch-Wheel
…  Icon size
…  Activate functions
…  Sort functions
…  Brightness
…  Time until dimming
…  Time until OFF after dimming
…  Calibrate Touch-Display
 „ Language
www.stiebel-eltron.com
Description
Store up to 12 names and temperatures.
Set and enable the maximum temperature for childproofing, "MAX" on the display, temperature ad-
justment to "MAX" only. Disable maximum temperature for 5 minutes:
► Press the symbol for 5 seconds to disable the maximum temperature for 5 minutes.
36,0 °C
Reduce flow rate to the preset value.
The flow rate is significantly reduced once the bath fill volume is reached.
Select functions for the programming unit.
Temperature, volume (selectable with DHE Connect only), no function
Select the display view.
Functions for the start screen.
Sequence of functions on the start screen.
Set the display brightness.
Dim the display.
Switch off the display after dimming.
You can carry out recalibration if the Touch-Display is not working properly.
Select the display language.
Conversion factor:
1 litre = 0.26417 gal. (3.78541 litres = 1 gal.)
DHE Connect | DHE Touch | 77