STIEBEL ELTRON DHE Connect 18/21/24 Bedienung Und Installation Seite 98

INSTALLATION
Commissioning
f Connect the programming unit connecting cable plug to the f
PCB.
f Hook the appliance cover at the top rear into the back panel. f
Pivot the appliance cover downwards. Check that the appli-
ance cover is securely seated at both top and bottom.
f Tick the selected connected load and rated voltage on the ap- f
pliance cover type plate (on both sides). Use a ballpoint pen
to do this.
f Secure the appliance cover with the screw. f
f Fit the fascia to the appliance cover. f
98 |DHE Connect | DHE Touch
f Switch the power supply ON. f
Note
The display activates after approximately 1 minute.
f Check the function of the appliance and the mini wireless f
remote control.
f Carry out quick commissioning for the most important set- f
tings. You can also adjust the settings to your needs later via
the "Settings / Standard settings" menu.
12.3 Mini wireless remote control
The mini wireless remote control is paired to the appliance at
the factory. If during commissioning the temperature cannot be
adjusted via the mini wireless remote control, repeat the pairing
process (see chapter "Alternative installation methods / Pairing
the mini wireless remote control").
www.stiebel-eltron.com