STIEBEL ELTRON DHE Connect 18/21/24 Bedienung Und Installation Seite 91

INSTALLATION
Standard installation
11. Standard installation
Opening the appliance
f Open the appliance by holding the fascia at the side and pull- f
ing forwards away from the appliance cover. Undo the screw.
Pivot open the appliance cover.
f Remove the back panel by pressing the two locking tabs and f
pulling the lower back panel section forwards.
www.stiebel-eltron.com
Preparing the power cable
160
30
1 Cable entry installation aid
f Prepare the power cable. f
Fitting the wall mounting bracket
f Mark out the holes for drilling using the installation tem- f
plate. If the appliance water connections are to be installed
on finished walls, also mark out the fixing hole in the lower
section of the template.
f Drill the holes and secure the wall mounting bracket at 2 f
points using suitable fixing materials (screws and rawl plugs
are not part of the standard delivery).
DHE Connect | DHE Touch |
1
91