Mini Wireless Remote Control; Pairing New/Additional Programming Units - STIEBEL ELTRON DHE Connect 18/21/24 Bedienung Und Installation

OPERATION
Settings
4.5

Mini wireless remote control

Using the mini wireless remote control you can adjust the temper-
ature setting wirelessly. Encoding prevents other wireless remote
controls from changing the settings.
Obstacles can affect the transmission path between the appliance
and the mini wireless remote control.
You can use the mini wireless remote control while having a show-
er or bath.
The mini wireless remote control is delivered paired to the instan-
taneous water heater.
3
38
2
1
1 Temperature selection "+" and "-" in 0.5 °C increments
2 Temperature adjustment 38 and 60 °C direct selection
buttons
3 LED
80 |DHE Connect | DHE Touch
+
60
_
OFF 3s
f The temperatures at the appliance can be adjusted using any f
button on the mini wireless remote control. The red LED indi-
cates that the mini wireless remote control is transmitting.
f You can switch the appliance heating system to "OFF" using f
the mini wireless remote control. Press and hold "-" for
≥ 3 seconds. Press any button to switch it back on.
If the battery is empty, see chapter "Troubleshooting / Replacing
the battery in the mini wireless remote control".
4.6

Pairing new/additional programming units

The DHE programming unit allows you to operate the appliance
remotely (for wireless remote controls, see chapter "Installation /
Accessories"). Encoding prevents the transmitters of third party
appliances changing the settings.
Obstacles can affect the transmission path between the appliance
and the programming unit.
You can pair the programming unit as follows:
f Using the programming unit built into the instantaneous f
water heater, open the "Service / Wireless / Connect other
wireless subscribers" menu item.
f Open the "Service / Wireless / Pair programming unit" menu f
item on the programming unit to be paired.
f Press "OK" on the programming unit to be paired. f
www.stiebel-eltron.com