Maintenance; Specification; Dimensions And Connections - STIEBEL ELTRON DHE Connect 18/21/24 Bedienung Und Installation

INSTALLATION

Maintenance

17. Maintenance
WARNING Electrocution
Before any work on the appliance, disconnect all poles
from the power supply.
Draining the appliance
The appliance can be drained for maintenance work.
WARNING Burns
Hot water may escape when you drain the appliance.
f Close the 3-way ball shut-off valve or the shut-off valve in the f
cold water inlet line.
f Open all draw-off valves. f
f Undo the water connections on the appliance. f
f Store the dismantled appliance in a room free from the risk f
of frost, as water residues remaining inside the appliance can
freeze and cause damage.
Cleaning the strainer
If dirty, clean the strainer in the threaded cold water fitting. Close
the 3-way ball shut-off valve or the shut-off valve in the cold water
inlet line before removing, cleaning and refitting the strainer.
www.stiebel-eltron.com

18. Specification

18.1 Dimensions and connections

225
140
100
c06
b02 Entry electrical cables I
c01 Cold water inlet
c06 DHW outlet
DHE Connect | DHE Touch |
≤ 20 105
b02
30
35
c01
Unfinished walls
Male thread
Male thread
dHe
G 1/2 A
G 1/2 A
111