STIEBEL ELTRON DHE Connect 18/21/24 Bedienung Und Installation Seite 79

OPERATION
Settings
Menu structure
 „ Connect
…  WLAN
…  Bluetooth
…  Registration
…  Termination
…  Appliance name
 „ Service
…  Wireless
… … Pair programming unit
… … Pair additional wireless subscribers Start wireless setup mode in the instantaneous water heater via the programming unit, to set up the
…  Fault
…  Contractor contact
…  Appliance details
…  Service code
www.stiebel-eltron.com
Description
For DHE Connect only:
You must register to be able to use the radio and weather functions. Access to a broadband internet
connection via WLAN is required for use.
Visible WLAN transmitters are detected automatically (can take up to 1 minute). Make sure that your
router/repeater settings allow additional WLAN subscribers.
Use the "WPS" (WiFi Protected Setup) button for easy wireless home network pairing. Alternatively
you can input the key manually, or connect to a hidden WLAN network by entering the SSID and key.
If your WLAN range does not cover your entire home, you may wish to use a wireless repeater. The
repeater increases the WLAN range.
®
Set up Bluetooth devices.
Registration for use of extended functions (weather data, internet radio, Bluetooth
DHE Connect.
Terminate registration
Change the appliance name
Menu for setting up the wireless connection between the instantaneous water heater and an external
programming unit or wireless remote control.
Start wireless pairing mode on the programming unit.
wireless connection to an external programming unit or wireless remote control.
Display appliance faults.
The qualified contractor can store their contact details here for service cases.
Type | Product ID | QR code. The QR code enables fast access to our internet site from a mobile termi-
nal device (smartphone or tablet).
Accessible to qualified contractors only.
®
, app) on the
DHE Connect | DHE Touch | 79